Epson PowerLite S5 Series User Manual

72 Fine-tuning the Projector
Restoring the Default Settings
The Reset menu lets you return most projector menu settings to their
default values. It also lets you reset the lamp hours to their initial
default value; see page 78 for instructions on resetting the lamp timer.
To reset most projector menu settings, select
Reset All and press the
Enter button to display the confirmation screen. Select Yes to reset all
the default settings or
No to cancel.
note
The Computer Input, Zoom
(PowerLite S5 Series only),
Lamp Hours, and Language
settings do not return to their
defaults when you select
Reset All. To reset the
computer input, use the
Reset option on the Signal
menu; see page 58 for details.
To reset the Zoom setting, use
the
Reset option on the
Settings menu; see page 61
for details. To reset the
Language settings, use the
Reset option on the
Extended menu; see page 63
for details.

Epson PowerLite S5 Series Specifications

General

Resolution	800 x 600 (SVGA)
Contrast Ratio	400:1
Weight	2.7 kg (6.0 lbs)
Projection System	3LCD, 3-chip technology
Lamp Type	170 W UHE
Lamp Life	3000 hours (Normal Mode)
Zoom Ratio	1.35x
Projection Size	30" to 300"
Input Ports	Composite Video (RCA), S-Video (Mini DIN 4-pin), Audio (Stereo Mini Jack), VGA (HD D-sub 15-pin)
Output Ports	VGA (HD D-sub 15-pin)
Noise Level	37 dB (Normal Mode), 30 dB (Low Brightness Mode)