Epson PowerLite S5 Series User Manual

52 Fine-tuning the Projector
Using the Projector’s Menu System
The six projector menus let you adjust and customize the projector
features:
■ The Image menu lets you modify the colors of the projected
image and fine-tune brightness, contrast, and sharpness.
■ The Signal menu lets you make adjustments to the input signal.
You can select your input source, change the image position and
aspect ratio, and adjust tracking and sync for computer images.
■ The Settings menu lets you customize the way you use the
projector. It allows you to adjust the volume and keystone
correction, set lamp brightness to high or low, and disable buttons
on the projector while you are projecting.
■ The Extended menu lets you customize the way you set up the
projector. Among the options, you can select the menu language,
set rear or ceiling projection, and record a custom image or logo
to be displayed as the startup screen or whenever you press the
A/V Mute button on the remote control.
■ The Info menu provides information about lamp status and
computer or video settings.
■ The Reset menu lets you restore the projector’s factory default
settings.

Epson PowerLite S5 Series Specifications

General

Resolution	800 x 600 (SVGA)
Contrast Ratio	400:1
Weight	2.7 kg (6.0 lbs)
Projection System	3LCD, 3-chip technology
Lamp Type	170 W UHE
Lamp Life	3000 hours (Normal Mode)
Zoom Ratio	1.35x
Projection Size	30" to 300"
Input Ports	Composite Video (RCA), S-Video (Mini DIN 4-pin), Audio (Stereo Mini Jack), VGA (HD D-sub 15-pin)
Output Ports	VGA (HD D-sub 15-pin)
Noise Level	37 dB (Normal Mode), 30 dB (Low Brightness Mode)