Epson PowerLite S5 Series User Manual

54 Fine-tuning the Projector
4. After highlighting the option you want to adjust, use the
Vol– or
Vol+ button on the remote control or left or right arrow buttons
on the projector to change the setting. In some cases, you may
have to press the
Enter button to see a sub-screen for changing
the setting.
■ Press the Vol– or Vol+ button on the remote control or the
left or right arrow buttons on the projector to adjust a slider
bar.
■ To select from two or more settings, use the Vol– or Vol+
buttons or arrow buttons to highlight the desired setting,
then press
Enter.
5. Press the
Esc button to return to the previous menu or to close
the menu system if you are at the main menu. Your changes are
saved automatically.
6. Press the
Menu button to exit the menu system.

Epson PowerLite S5 Series Specifications

General

Resolution	800 x 600 (SVGA)
Contrast Ratio	400:1
Weight	2.7 kg (6.0 lbs)
Projection System	3LCD, 3-chip technology
Lamp Type	170 W UHE
Lamp Life	3000 hours (Normal Mode)
Zoom Ratio	1.35x
Projection Size	30" to 300"
Input Ports	Composite Video (RCA), S-Video (Mini DIN 4-pin), Audio (Stereo Mini Jack), VGA (HD D-sub 15-pin)
Output Ports	VGA (HD D-sub 15-pin)
Noise Level	37 dB (Normal Mode), 30 dB (Low Brightness Mode)