60 Fine-tuning the Projector
■ Video Signal (composite and S-Video)
Leave this setting at
Auto unless you are using a 60-Hz PAL
system (select
PAL60).
■ Aspect
Sets the image’s aspect ratio (ratio of width to height) to 4:3
for computer or letterbox video content and to
16:9 for
widescreen video content. You can also select
16:9 (Up) for a
widescreen display at the top of the screen or
16:9 (Down)
for a widescreen display at the bottom of the screen.
4. When you’re finished adjusting the signal settings, press
Esc or
Menu.
To Next Page
Loading...
