Why does my Epson Printer show 'Arm move error'?
The Epson Printer displays 'Arm move error' because the arm cannot be moved. Here's what to do: 1. Turn off the power. 2. Open the disc cover and remove any dust or foreign objects that are inside. 3. Turn on the power. If the same error message still appears, repair is required. Please contact Customer Support.
What to do if my Epson PP-100N - Discproducer - DVD Duplicator x2 has 'Internal drive error (DR1/2)'?
If your Epson Printer displays an 'Internal drive error (DR1/2)', turn off the power, and then turn it on again. If the same error message still appears, repair is required. Please contact Customer Support.
What to do if my Epson PP-100N - Discproducer - DVD Duplicator x2 shows 'Transferred disc detection error'?
If your Epson Printer displays 'Transferred disc detection error', a disc could not be detected after transfer to a printer or drive. Turn off the power, and then turn it on again. If the same error message still appears, repair is required. Please contact Customer Support.
How to fix Epson PP-100N - Discproducer - DVD Duplicator x2 'Fan control error'?
If your Epson Printer displays a 'Fan control error', turn off the power, and then turn it on again. If the same error message still appears, repair is required. Please contact Customer Support.
What to do if my Epson Printer has 'Invalid state error'?
If your Epson Printer displays an 'Invalid state error', turn off the power, and then turn it on again. If the same error message still appears, repair is required. Please contact Customer Support.
What to do if my Epson PP-100N - Discproducer - DVD Duplicator x2 Printer displays 'Disc is wrong type'?
If your Epson Printer displays 'Disc is wrong type', the job is paused. Here’s what to do: 1. Open the disc cover. 2. Remove the disc from the input stacker (Stacker 1 or Stacker 2) that is a different type from the disc type that was set. 3. Load the correct disc type. 4. Close the disc cover. The job should restart automatically.
What to do if my Epson PP-100N - Discproducer - DVD Duplicator x2 has 'Internal printer error'?
If your Epson Printer shows an 'Internal printer error', turn off the power, and then turn it on again. If the same error message still appears, repair is required. Please contact Customer Support.
General| Model | PP-100N |
|---|---|
| Brand | Epson |
| Number of Drives | 2 |
| Duplication Capacity | Up to 100 discs |
| Disc Capacity | 100 discs |
| Print Method | Inkjet |
| Print Resolution | 1440 x 720 dpi |
| Connectivity | USB 2.0 |
| Interface | USB |
| Type | DVD Duplicator |
| Supported Media | CD-R, DVD-R |
| Print Speed | Approximately 30 seconds per disc |
Essential safety guidelines and warnings for product operation.
Important safety warnings related to the power source and electrical connections.
Important warnings and precautions regarding the product's operation and handling.
Step-by-step guide for installing the necessary software for the product.
Procedure for registering the product with the client computer.
Software for editing write data and print data for label surfaces.
Software for registering the product and checking settings.
Procedure for checking ink levels and replacing ink cartridges.
List of error messages and their corresponding solutions.
Common issues like power problems and their troubleshooting steps.
Solutions for errors encountered during disc writing or reading.
To Next Page
