Epson SC-F2100 SERIES

Specifications Table
Printer Specifications
Printing method On-demand ink jet
Nozzle configuration
White ink mode White: 360 nozzles x4
Color: 360 nozzles (x4 colors)
Cleaning: 360 Nozzles x2
Color ink mode 360 nozzles (x4 colors)
Cleaning: 360 Nozzles x6
High-speed
color mode
360 nozzles x2 (x4 colors)
Cleaning: 360 Nozzles x2
Resolution (maxi-
mum)
White: 1440 x 1440 dpi
Color: 1440 x 720 dpi
Control code ESC/P raster (undisclosed
command)
Platen feed meth-
od
Conveyor belt
Built-in memory Main memory: 512 MB
Network: 128 MB
Interface 2 ports of Hi-Speed
USB-Compatible with the USB 2.0
Specification (Rear: for connecting
with a computer, Front: for a USB
memory device)
Ethernet 10Base-T/100Base-TX
*
Rated voltage AC 100 to 240 V
Rated frequency 50/60 Hz
Rated current 0.7 to 0.4 A
Power consumption
In use Approx. 55 W
Sleep mode Approx. 10 W
Power off 0.5 W or less
Platen installation plate (The platen weight must not ex-
ceed 3.7 kg)
Printer Specifications
Socket interval 128 mm
Socket diameter 19.9 mm
Available
heights
23.5 to 31.5 mm
Thickness of
height
regulation
spacers
7.5 mm (4 points)
Temperature Operating: 10 to 35 ˚C
Storage (before unpacking): -20 to
60 ˚C (within 120 hours at 60 ˚C,
within one month at 40 ˚C)
Storage (after unpacking): -20 to 40
˚C (within one month at 40 ˚C)
Humidity
(without conden-
sation)
Operating: 20 to 80%
Storage (before unpacking): 5 to
85%
Storage (after unpacking): 5 to 85%
Operating temperature/humidity
External dimen-
sions (when stor-
ed)
(W) 985 x (D) 1425 x (H) 490 mm
Weight Approx. 84 Kg
(when supplied platen is installed,
not including ink cartridges or
waste ink tubes)
* Use a shielded twisted pair cable (category 5 or better).
c
Important:
Use this printer at altitudes below 2000 m.
SC-F2100 Series User's Guide
Appendix
125