c
Important:
❏ Load the T-shirt so that the side seams and
sleeve seams are not on the top. If there are
raised sections such as seams, a Platen
Height Error may occur, or the print
quality may decline.
❏ Do not pull too hard on the T-shirt. If the
T-shirt is stretched too much, the print
quality may decline due to deformed
images and so on, and the white
under-base print may extend outside the
image.
F
Attach the platen frame again.
Load it so that the small holes in the frame are at
the front and back.
G
Pull the T-shirt outside of the frame to remove
any creases and slack.
c
Important:
Stretch the T-shirt so that there are no creases
or slack. However, if the T-shirts is stretched
too much, the print quality may decline due to
deformation of the image, and the white
under-base print may extend outside the
image.
H
Press down the frame of the platen so that it does
not become loose.
I
Tuck in the T-shirt around the frame so that it
does not drape over the movable base.
Loading on Medium Grooved
Platens
Buttons that are used in the following operations
A
Press the P button to turn on the printer.
B
Check that the platen is ejected forward.
If it is not ejected, press the } button to move the
platen forward.
SC-F2100 Series User's Guide
Basic Printing
51
To Next Page
Loading...
Need help?
General