Epson SC-P20000 SERIES User Manual

Messages What to do
HDD Error
HDD used for another printer
needs to be formatted. Continue?
Optional hard disk units and Adobe PostScript 3 Expansion Units that had been
connected to another printer must be formatted when using on this printer. The disk
cannot be used until it is formatted. When you select Yes, formatting starts. When you
select No, the printer does not recognize the hard disk unit or the Adobe PostScript 3
Expansion Unit when it starts up.
Storage Error
Check if hard disk unit is correctly
installed.
Press the W button and select Job Cancel to stop printing. Remove and then
reconnect the optional hard disk unit or Adobe PostScript 3 Expansion Unit.
If this message appears on the LCD panel again, contact your dealer or Epson Support.
When you are printing via the printer driver included with the printer, you can print
regardless of the hard disk status when you select Print only in the Settings dialog box
of Hard Disk Unit. If the Adobe PostScript 3 Expansion Unit is installed, you cannot print
via the PS driver.
Data Size Error
Data size of print job is too large.
Check on print job.
The optional hard disk unit or Adobe PostScript 3 Expansion Unit can store print jobs
up to 100 GB in size. To print larger jobs, select Print only from Hard Disk Unit in the
printer driver; alternatively, ensure that print jobs are less than 100 GB in size.
U “Saving Print Jobs” on page 65
HDD Store Error
Hard disk does not have enough
space.
See documentation for how to
delete stored print jobs.
Unwanted jobs can be deleted from Remote Manager or the LFP HDD Utility.
U “Print Job Management” on page 64
HDD Boot Error
Hard disk error. Hard disk cannot
be used.
Press the Z button to clear the error from the control panel. When you are printing
using the printer driver included with the printer, you can print regardless of the hard
disk status when you select Print only in Hard Disk Unit. If the Adobe PostScript 3
Expansion Unit is connected, you cannot print via the PS driver.
U “Saving Print Jobs” on page 65
If this message appears on the LCD panel again, contact your dealer or Epson Support.
Held Jobs Limit
Held job queue full.
The number of held jobs has reached 200.
Press the Z button and select Resume All Jobs.
U “Function Summary” on page 64
Firmware Error
Firmware mismatch between
Adobe Postscript 3 Expansion
Unit and printer.
Refer to manual for details.
Operation is not possible because the versions of firmware of the optional Adobe
PostScript 3 Expansion Unit and the firmware of the printer are not compatible.
Update both to the latest firmware.
The latest firmware can be downloaded from the Epson website.
Feed Stabilizer Error
Paper Feed Stabilizer is not
available.
Continue printing ?
The paper feed stabilizer function has malfunctioned. When you select Yes
, Pa
per
Feed Stabili
zer is set to Off and printing continues. When you select No, the screen
will show a service call message.
U “Setup menu” on page 130
Paper Feed Sensor Error
Refer to the manual to find out
how to solve the problem.
The sensor for the paper feed is dirty. Clean the sensor.
U “Cleaning Inside the Printer” on page 155
Paper Feed Stabilizer is not
available.
This is displayed when you select Yes in Feed Stabilizer Error. The message is cleared
when the error is released.
SC-P20000 Series/SC-P10000 Series User's Guide
Problem Solver
162

Epson SC-P20000 SERIES Specifications

General

Brand	Epson
Model	SC-P20000 SERIES
Category	Printer
Language	English