J
Attach the screws, and then close the cartridge
cover.
K
Open the printer cover, and then use a cleaning
stick to wipe away dirt on the top edges of the
cap (two points).
c
Important:
Do not rub the caps or wipers too hard as
this can damage them. If they are damaged,
air can get in which will dry the head or
cause the cleaning failure.
L
Wipe the outer areas of the wipers (three
points) and the top edges.
(1) Wipe the outer areas of the front wipers
(two points).
(2) Wipe the outer areas of the rear wiper (one
point).
(3) Wipe the top edges of the wipers (three
points).
SC-P20000 Series/SC-P10000 Series User's Guide
Problem Solver
172