A
Turn on the printer by pressing the P button.
Note:
After finishing operations, return the support bar
to the storage position.
B
Press the M button on the control panel. Press
the d/u button to highlight Poster Board and
press the Z button.
C
Pull out while lifting the poster board support.
D
While aligning the edge of the board along the
inner projecting support, insert it with the
printable side facing up.
Note:
If the paper gets stuck and cannot be inserted,
remove it until you see the leading edge of the
poster board, and then insert it again.
E
Insert the board, checking to be sure that it
passes under the rollers.
SC-P20000 Series/SC-P10000 Series User's Guide
Basic Operations
42
To Next Page
Loading...
Need help?
General