When the I light flashes, remove the thick paper, CD
or DVD, and then press the I button.
When printing on roll paper
Press the I button.
The print job is canceled even in the middle of printing.
It may take a while before the printer returns to ready
status after canceling a job.
To prevent the canceled print image and the next print
image from overlapping, press the M button.
A cut line is printed, and the roll paper is fed forward.
Printable area
The printable area is shown in gray in the illustration
below. Note, however, that owing to the design of the
printer, print quality will drop in the areas with
hatching.
The arrow in the illustration indicates the direction of
the ejected paper.
c
Important:
The width of the margins may vary somewhat
depending on how the paper is loaded and its
elasticity.
The Printed Area for Cut Sheets
Normal printing
Borderless printing
* 2
*1 20 mm in the case of thick paper.
*2 Thick paper is not supported.
The Printed Area for Roll Paper
Normal printing Borderless printing
SC-P400 Series User's Guide
Basic Operations
31
To Next Page
Loading...
Need help?
General