C
Select Auto Expand or Retain Size as the
Method of Enlargement. If you select Auto
Expand, set how much of the image goes beyond
the edge of the paper as shown below.
Max Sizes larger than A4:
Approximately 3 mm past the top,
4.5 mm past the bottom, and 3.5 mm
past the left and right edges
A4 or smaller (excluding 100 x 148
mm, 9 x 13 cm/3.5 x 5 in., 10 x 15 cm/
4 x 6 in.):
Approximately 3 mm past the top,
4mm past the bottom, and 2.5mm
past the left and right edges
100 x 148 mm, 9 x 13 cm/3.5 x 5 in., 10
x 15 cm/4 x 6 in.:
Approximately 1.3mm past the top,
2.5mm past the bottom, and 2.5mm
past the left and right edges
Mid ½ of Max
Min ¼ of Max
Note:
Choosing Mid or Min decreases the image
enlargement ratio. As a result, margins may appear
at the edges of the paper depending on the paper
and printing environment.
D
Check other settings and start printing.
Making Settings for Mac OS X
A
Open the Print screen and select the paper size
from the Paper Size option, and then select a
borderless printing method.
U “Printing (Mac OS X)” on page 28
The selections for borderless printing methods
are displayed as shown below.
XXXX (Sheet Feeder - Borderless (Auto
Expand))
XXXX (Sheet Feeder - Borderless (Retain Size))
XXXX (Roll Paper - Borderless)
XXXX (Re.-FineArt-Borderless, Auto Expand)
XXXX (Re.-FineArt-Borderless, Retain Size)
Where XXXX is the actual paper size, such as A4.
If items on the Page Setup screen are not
displayed on the Print screen due to the
application being used, display the Page Setup
screen and then make settings.
B
If Auto Expand is selected for Paper Size, set how
much of the image goes beyond the edge of the
paper in the Expansion screen.
Select Page Layout Settings from the list. The
following shows how much the image will be
larger than the paper edges.
Max Sizes larger than A4:
Approximately 3 mm past the top,
4.5 mm past the bottom, and 3.5 mm
past the left and right edges
A4 or smaller (excluding 100 x 148
mm, 9 x 13 cm/3.5 x 5 in., 10 x 15 cm/
4 x 6 in.):
Approximately 3 mm past the top,
4mm past the bottom, and 2.5mm
past the left and right edges
100 x 148 mm, 9 x 13 cm/3.5 x 5 in., 10
x 15 cm/4 x 6 in.:
Approximately 1.3 mm past the top,
2.5 mm past the bottom, and 2.5 mm
past the left and right edges
Mid ½ of Max
Min ½ of Max
SC-P400 Series User's Guide
Printing Varieties
50