Making Settings in Windows
A
In the printer driver's Main screen, select Media
Type.
U “Printing (Windows)” on page 27
B
Select Roll Paper or Roll Paper (Banner) from
the Source list.
Note:
❏ You can only use Roll Paper (Banner) when
printing from applications that support
banner printing.
❏ Selecting Roll Paper (Banner) sets the top and
bottom margins of the paper to 0 mm.
C
Select an option for Size that corresponds to the
size of the document created in the application.
Select User Defined Paper Size to specify a
non-standard paper size.
U “User-defined Paper Sizes/Custom Paper
Sizes” on page 62
Note:
If you are printing from applications that support
banner printing, you do not need to set User
Defined Paper Size if you select Roll Paper
(Banner) as the Source.
D
Scale the output as desired.
U “Enlarged/Reduced Printing” on page 51
Note:
If you are printing from applications that support
banner printing, you do not need to adjust the scale
if you select Roll Paper (Banner) as the Source.
E
Make sure the Optimize Enlargement check box
is selected.
F
Check other settings and start printing.
SC-P400 Series User's Guide
Printing Varieties
65