3.
On the PhotoEnhance screen, you can set
e๎ects
to apply to the print data.
See the printer driver help for more details on each item.
4.
Check other settings, and then start printing.
Printing Banners
You can print banners and panoramic pictures if you create and set print data for banner printing in your
application. When printing using document preparation
so๎
ware,
image editing
so๎
ware,
and so on, create print
data with the same length and width ratio as the size you want to print.
๎e
following printing sizes are available.
Width SC-P900 Series: 431.8mm
SC-P700 Series: 330mm
Length
*
Max. 18m
*: The paper length can be longer if using applications that support banner printing. However, the actual print size depends
on the application, the paper size loaded in the printer, and the computer environment.
1.
In the printer driver's Main tab, select Media Type.
2.
Select Roll Paper from the Source list.
3.
Click User De๎ned and match the paper size to the size of the data if necessary.
4.
Make sure the Optimize Enlargement check box is selected on the Layout tab.
5.
Check other settings, and then start printing.
Printing by Increasing Black Density
To print by increasing black density, use black enhance overcoat in the printer driver. ๎is feature overcoats light
gray ink on the dark parts of printouts to increase the maximum density of black and to increase the dynamic
range.
Black enhance overcoat is only available for glossy paper. Note that it is not available for all types of glossy paper.
Printing
>
Printing Photos
>
Printing Varieties (Windows)
56
To Next Page
Loading...
Need help?
General
