Epson SC-P9000 Series - Printer Specifications Table

Specifications Table
Printer Specifications
Printing method On-demand ink jet
Nozzle configura-
tion
SC-P9000 Series/SC-P7000
Series
360 nozzles x 10 colors (Cyan, Light
Cyan, Vivid Magenta, Vivid Light
Magenta, Yellow, Orange, Green,
Violet
*
/Light Light Black
*
, Light
Black, Photo Black/Matte Black)
* Select one of these colors.
SC-P8000 Series/SC-P6000
Series
360 nozzles x 8 colors (Cyan, Light
Cyan, Vivid Magenta, Vivid Light
Magenta, Yellow, Light Light Black,
Light Black, Photo Black/Matte
Black)
Resolution (maxi-
mum)
2880×1440 dpi
Control code ESC/P raster (undisclosed
command)
Media feed meth-
od
Friction feed
Built-in memory 1GB for Main
64MB for Network
Network Functions IPv4, IPv6, WSD, SSL
communication, IEEE802.1X
Rated voltage AC 100 to 240 V
Rated frequency 50 to 60 Hz
Rated current 2A
Power consumption
In use
SC-P9000 Series/SC-P8000
Series
Approximately 75 W
SC-P7000 Series/SC-P6000
Series
Approximately 65 W
Ready mode Approximately 19 W
Sleep mode Approximately 2.0 W
Power off 0.5 W or less
Printer Specifications
Temperature Operating: 10 to 35 ˚C (50 to 95˚F)
Storage (before unpacking):
-20 to 60 ˚C (-4 to 140˚F) (within 120
hours at 60 ˚C (140˚F), within a
month at 40 ˚C (104˚F)
Storage (after unpacking):
-20 to 40 ˚C (-4 to 104 &F) (within a
month at 40 ˚C (104 ˚F))
Humidity Operating: 20 to 80% (without
condensation)
Storage (before unpacking): 5 to
85% (without condensation)
Storage (after unpacking): 5 to 85%
(without condensation)
Operating temperature/humidity (optional Hard Disk Unit
not installed)
Operating temperature/humidity (optional Hard Disk Unit
installed)
SC-P9000 Series/SC-P7000 Series/SC-P8000 Series/SC-P6000 Series User's Guide
Appendix
183