Epson SC-T5200 Series User Manual

C
Set color management to off.
For Windows
In the Printer Settings tab, select Advanced
Settings in the Print Quality area and choose
Off (No Color Management) for Color Mode.
For Mac OS X
Choose Printer Settings from the list and select
Advanced Settings for Mode. Select Off (No
Color Management) for Color Mode.
D
Check other settings, and then start printing.
Setting color
management with the
printer driver
Color management printing by
Host ICM (Windows)
Use image data in which an input profile has been
embedded. Also, the application must support ICM.
A
Make the settings for color adjustment using the
application.
Depending on the type of the application, make
the settings following the table below.
Adobe Photoshop CS3 or later
Adobe Photoshop Elements 6 or later
Adobe Photoshop Lightroom 1 or later
OS Color Management
Settings
Windows 8.1,
Windows 8,
Windows 7,
Windows Vista
Printer Manages Colors
Windows XP
(Service Pack 2 or
later and .NET 3.0
or later)
Windows XP
(other than the
above)
No Color Management
In other applications, set No Color
Management.
Note:
For information on supported platforms, see the
website for the application in question.
Example of Adobe Photoshop CS5
Open the Print screen.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide
Color Management Printing
116

Epson SC-T5200 Series Specifications

General

Memory	1 GB
Print Resolution	2880 x 1440 dpi
Print Speed	28 seconds per A1 sheet
Paper Sizes	A0, A1, A2, A3+, A3, A4
Print Margin Roll	3 mm (top, side, bottom)
Interfaces	USB 2.0, Ethernet
Hard Disk	320 GB
Acoustic Noise	50 dB(A)
Dimensions	1405‎ x 813 x 1128 mm (Width x Depth x Height)
Ink Colors	Cyan, Magenta, Yellow, Black
Media Types	Plain paper, Photo paper
Operating Systems	Mac OS X 10.6.8 or later