Epson SC-T5200 Series User Manual

Making Settings for Mac OS X
A
Using the control panel of the printer, confirm
Type Match is set in Setup menu > Printer Setup
> Roll Paper Setup > Roll Switch Condition >
Paper Type.
The default Paper Type setting is Type Match. If
the setting has not been changed, the setting is
Type Match.
U “Setup menu” on page 146
B
On the computer, open the Print screen, confirm
that Paper Size is Roll Paper, and then select
Printer Settings from the list.
C
Check that the Roll Switch is Auto.
If the setting is not Auto, click it and select
Auto.
D
For Media Type, select the paper type you want
to use for printing.
In this example, Plain Paper or Singleweight
Matte Paper is selected depending on the
purpose of its use.
E
Set Print Quality and other necessary settings,
and then print.
If a message The Media Type differs to the
setting on the printer. is appears, click Ignore.
Switching to Roll 1/Roll 2 by
Document Size
For example, when you use the following method often,
if you use the settings described below, the printer can
switch between Roll 1 and Roll 2 automatically in
accordance with the document size of the print job.
Usage example
You want to switch automatically to the roll paper with
the smaller margin automatically when printing
drawings of various sizes including A0, A1, A2, and A3.
In this example, the paper is loaded as follows. The paper
type is the same.
Roll 1: A2 width
Roll 2: A0 width
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide
More Ways to Print
92

Epson SC-T5200 Series Specifications

General

Memory	1 GB
Print Resolution	2880 x 1440 dpi
Print Speed	28 seconds per A1 sheet
Paper Sizes	A0, A1, A2, A3+, A3, A4
Print Margin Roll	3 mm (top, side, bottom)
Interfaces	USB 2.0, Ethernet
Hard Disk	320 GB
Acoustic Noise	50 dB(A)
Dimensions	1405‎ x 813 x 1128 mm (Width x Depth x Height)
Ink Colors	Cyan, Magenta, Yellow, Black
Media Types	Plain paper, Photo paper
Operating Systems	Mac OS X 10.6.8 or later