Large Copy / Large Scan menu
This menu is displayed only when the optional MFP Scanner is connected.
U “Large Copying and Large Scanning using the MFP Scanner (Option)” on page 71
*1. SC-T7200D Series/SC-T5200D Series only
*2. SC-T7200 Series/SC-T5200 Series
*3. Displayed when the optional hard disk unit or PS3 Expansion Unit has been connected
*4. Displayed when the optional PS3 Expansion Unit has been connected
* Default setting
Copy Settings
Item Description
Roll Select
Roll 1
*
Choose whether to copy and print using Roll 1 or Roll 2.
When roll paper that does not support large copy/large
scan is loaded, this option is not displayed.
Roll 2
Scaling
Manual
*
25 to 400% (100
*
)
Choose whether to set the copy scaling manually
(Manual) or zoom automatically in accordance with the
width of the loaded roll paper (Auto).
Auto
Color/Grayscale
Color
*
Choose whether to copy a color document and print it
with colors or in black and white.
Grayscale
Document Type
Text/Line Drawing
*
Select the type in accordance with the loaded document.
Tracing Paper
Recycled Paper
Blueprint
Poster
Width
Auto
*
The default setting of Auto is recommended in most
situations. Note that, depending on the document, it may
not be possible to detect the width correctly even when
the setting is Auto. In such cases, change from the
standard size and specify a width of your choosing.
ISO A, US-ANSI,
US-ARCH, JIS B, ISO
B
The supported sizes are
displayed.
cm
20 to 90 cm (20
*
)
inch
8 to 36 in (8
*
)
Quality
Speed
*
Choose the quality of copying and printing.
Fine prioritizes quality so the print speed is slower.
The selectable options vary with the Document Type
setting.
Fine
Density
Level -3 to 3 (0
*
)
Set the copy density. Negative values (-) are lighter, and
positive values (+) is darker.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide
Using the Control Panel Menu
162
To Next Page
Loading...
Need help?
General
