Epson SC-T5200 Series User Manual

Settings on Windows
A
Using the control panel of the printer, confirm
Best Fit is set in Setup menu > Printer Setup >
Roll Paper Setup > Roll Switch Condition >
Paper Width.
The default Paper Width setting is Best Fit. If the
setting has not been changed, the setting is Best
Fit.
U “Setup menu” on page 146
B
Open the Printer Settings tab of the printer driver
and confirm that Source is Roll Auto -
XXXXX.
XXXXX indicates the width of the roll paper
currently in use.
If the setting is not Roll Auto - XXXXX, click it
and select Roll Auto - XXXXX.
C
For Paper Size, select the Paper Size set in the
application.
In this example, select A1 594 x 841 mm.
D
Set Print Quality and other necessary settings,
and then print.
The printer prints to the roll paper of Roll 2 (A0
Width).
If A3 or A2 is selected in Step 3, the printer prints
to the roll paper of Roll 1 (A2 Width).
Making Settings for Mac OS X
A
Using the control panel of the printer, confirm
Best Fit is set in Setup menu > Printer Setup >
Roll Paper Setup > Roll Switch Condition >
Paper Width.
The default Paper Width setting is Best Fit. If the
setting has not been changed, the setting is Best
Fit.
U “Setup menu” on page 146
B
On the computer, open the Print screen, confirm
that Paper size is Roll Paper.
In this example, select A1.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide
More Ways to Print
93

Epson SC-T5200 Series Specifications

General

Memory	1 GB
Print Resolution	2880 x 1440 dpi
Print Speed	28 seconds per A1 sheet
Paper Sizes	A0, A1, A2, A3+, A3, A4
Print Margin Roll	3 mm (top, side, bottom)
Interfaces	USB 2.0, Ethernet
Hard Disk	320 GB
Acoustic Noise	50 dB(A)
Dimensions	1405‎ x 813 x 1128 mm (Width x Depth x Height)
Ink Colors	Cyan, Magenta, Yellow, Black
Media Types	Plain paper, Photo paper
Operating Systems	Mac OS X 10.6.8 or later