Epson SC-T5200 Series User Manual

Menu item Description
Printer Status Firmware Version xxxxxxx,x.xx,xxxx
Option Status Displays the options connected.
Show Total Prints
XXXXXX m
2
Print Status Sheet
Press Z to start printing.
Network Setup IP Address Setting Auto -
Panel IP Address, Subnet Mask, Default Gateway
IPv6 Setting Enable, Disable
IPsec Setting Enable, Disable
PSK Setting Set key at 20 characters or less (half-size characters or sym-
bols)
IEEE802.1x Setting Enable, Disable
HTTPS Redirect Setting Enable, Disable
Print Status Sheet
Press Z to start printing.
Restore Settings Yes, No
Power Settings Sleep Mode 5 to 210 minutes
Power Off Timer Off, 1 to 24 hours
Restore Settings Yes, No
Preference Language Lists the supported languages.
Unit: Length m, ft/in
Alert Lamp Setting On, Off
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide
Using the Control Panel Menu
136

Epson SC-T5200 Series Specifications

General

Memory	1 GB
Print Resolution	2880 x 1440 dpi
Print Speed	28 seconds per A1 sheet
Paper Sizes	A0, A1, A2, A3+, A3, A4
Print Margin Roll	3 mm (top, side, bottom)
Interfaces	USB 2.0, Ethernet
Hard Disk	320 GB
Acoustic Noise	50 dB(A)
Dimensions	1405‎ x 813 x 1128 mm (Width x Depth x Height)
Ink Colors	Cyan, Magenta, Yellow, Black
Media Types	Plain paper, Photo paper
Operating Systems	Mac OS X 10.6.8 or later