Code Message What to do
I-2201 Ink Low
(xxxx)
Prepare a new ink cartridge.
You may continue printing until replacement of the ink
cartridge is required.
Epson recommends the genuine Epson cartridges listed above.
Check the message, and then click
OK.
Prepare a new ink cartridge for the
color and model number displayed in
xxxx, and then get ready to replace the
cartridge.
U “Replacing Ink Cartridges” on
page 47
I-2101 to I-2104 It is nearly time to replace parts.
xxxxxx
Contact a technical representative.
You cannot print if parts have reached the end of their service
life.
Contact service support and request
replacement for the part displayed in
xxxxxx.
W-1301 The scrap paper box has come off.
Delete all print jobs remaining in the operating system's print
queue.
Install the scrap paper box correctly.
After deleting all of the print jobs,
attach the scrap paper box. If a
message is displayed, check the
details.
W-1302 Cartridge cover (right) open.
Delete all print jobs remaining in the operating system's print
queue.
When replacing a cartridge, check the location and the cartridge
type.
Close the cartridge cover.
After deleting all of the print jobs, close
the cartridge cover (right). If a message
is displayed, check the details.
W-1303 Cartridge cover (left) open.
Delete all print jobs remaining in the operating system's print
queue.
When replacing a cartridge, check the location and the cartridge
type.
Close the cartridge cover.
After deleting all of the print jobs, close
the cartridge cover (left). If a message is
displayed, check the details.
W-1304 Top cover open.
Delete all print jobs remaining in the operating system's print
queue.
Close the top cover.
After deleting all of the print jobs, close
the top cover. If a message is displayed,
check the details.
W-1305 Rear cover open.
Delete all print jobs remaining in the operating system's print
queue.
Close the rear cover.
After deleting all of the print jobs, close
the rear cover. If a message is
displayed, check the details.
I-1311 Check the scrap paper box.
Empty the box if it is full.
Check the scrap paper box, and empty
it if it is full.
U “Emptying the Scrap Paper Box” on
page 60
W-1101 A paper jam has occurred.
Delete all print jobs remaining in the operating system's print
queue.
Remove any paper remaining from the roll paper feeder, and
then reload the paper.
After deleting all of the print jobs,
remove the paper from the roll paper
feeder, and then reload the paper.
U “Paper Jams” on page 76
SL-D700 Operation Guide
Troubleshooting
69
To Next Page
Loading...
