Epson SL-D700 - Paper is Jammed in the Roll Paper Feeder

Paper is Jammed in the Roll Paper Feeder
Error message W-1101 - When the message "Remove paper that remains in the paper feeder, and then load the paper
again." is displayed, follow the steps below.
A
Delete all jobs from the Print queue.
U “Deleting Print Jobs” on page 77
B
Remove the scrap paper box.
Pull the top section forward and then lift out the bottom section.
C
Grip the handle to release the lock, and then pull out the roll paper feeder.
SL-D700 Operation Guide
Troubleshooting
79