Epson SS-300 - Page 89

89
Chapter 8
About Settings
Setting the pace alarm
The pace alarm noties you when you have reached the target pace that you set.
You can set the maximum and minimum pace at which the alarm sounds.
1
Select [Pace Alarm] from [Menu] - [Settings] - [Alarm], and
then press
.
The [Max. Pace] settings screen is displayed.
2
Use / to highlight [ON] or [OFF], and then press .
Select [ON] to set the maximum pace limit ( go to step
3
).
Select [OFF] to set the minimum pace without setting the maximum pace
(
go to step
4
).