Epson SS-300 - Page 94

94
Chapter 8
About Settings
5
Use / to set the minimum heart rate at which the
alarm sounds, and then press
.
You can set the HR (heart rate) in increments of 1 bpm within a range of 30 to
240 bpm.
Hold down
/ to speed through the numbers.
After conrming the selection, the [Alarm] function selection screen is displayed.
6
Hold down for at least two seconds to return to the
[Settings] screen.
7
Hold down for at least two seconds to return to the
[Menu] screen.
To turn this function o, select [OFF] in step
2
and step
4
.