Maintaining Your Printer
33
6. Pinch the front and back tabs of the
cartridge as you lift it out of the
printer. Don’t take the used
cartridge apart or try to refill it.
Warning: If ink gets on your hands,
wash them thoroughly with soap and
water. If ink gets in your eyes, flush
them immediately with water.
7. Before you remove the new cartridge
from its package, shake it four or five
times.
8. Remove the cartridge from its
package and lower it into the
cartridge holder. Push down gently
until the new cartridge is firmly
seated.
9. Repeat steps 6 through 8 for each
cartridge you want to replace.
10. Close the printer cover and press the H ink button for one second. The printer
moves the print head and begins charging the ink delivery system.
The green P power light flashes and the printer makes noise. Charging takes
about one minute. When it’s finished, the P power light stops flashing and
stays on.
Caution: Never turn off the printer while the Ppower light is flashing, unless the
printer hasn’t moved or made noise for more than 5 minutes.
To Next Page
Loading...
Need help?
General