Maintaining Your Printer
37
Transporting the Printer
If you move your printer some distance, you need to prepare it for transportation in
its original box or one of a similar size. Follow these steps:
Caution: To avoid damage, always leave the ink cartridges installed when
transporting the printer.
Be sure to remove the tape used in step 5 after installing the printer in its new
location.
1. Turn on the printer and wait until the print head locks in the far right position.
Then press the P power button to turn the printer off.
2. Unplug the power cord.
3. Disconnect the printer cable from the printer.
4. Remove any paper from the printer and remove the paper support.
5. Open the printer cover. Secure
the ink cartridge holder to the
printer with tape as shown, then
close the printer cover.
6. Push in the output tray extensions
and close the tray.
7. Repack the printer and
attachments in the original box
using the protective materials
that came with it.
Be sure to keep the printer level as
you move it.
After transporting the printer, remove the tape securing the print head and test your
printer. If you notice a decline in print quality, clean the print head (see page 25); if
output is misaligned, align the print head (see page 34).
Tape the ink
cartridge holder to
the printer case
To Next Page
Loading...
