Using the Printer Software for Macintosh 5-11
Follow the steps below to select a custom setting.
1. Confirm that the Media Type and Ink settings in the Print
dialog box are correct. For details, see “Making the Ink
setting” on page 5-14 or “Making the Media Type setting” on
page 5-3.
2. Select Custom as the Mode setting in the Print dialog box.
This enables the Custom Settings list, located to the right of
the Custom radio button.
3. From the Custom Settings list, select the most appropriate
setting for the type of document or image that you want to
print.
Making the Advanced settings
The settings in the Advanced dialog box give you complete
control over your printing environment. Use these settings to
experiment with new printing ideas or to fine-tune a range of
print settings to meet your individual needs. Once you are
satisfied with your new settings, you can give them a name and
add them to the Custom Settings list in the Print dialog box.
Follow the instructions below to make Advanced settings.
To Next Page
Loading...
