3-54 Printing with Windows
Using Port Configuration (Windows NT 4.0 only)
Note:
Port settings are complicated and should only be made by an experienced
user with administrative privileges.
If your computer has a parallel port that supports ECP mode, you
can make certain print speed settings in the Port Configuration
dialog box. Before making settings, make sure that ECP mode is
selected in your computer settings. For details about ECP mode,
see your computer manual.
To access the Port Configuration dialog box, click the Start button,
point to Settings, and click Printers. Then, select your printer
and click Properties on the File menu. The printer software
opens. Click the Ports tab, then click Configure Port. The
following dialog box appears.
Click the LPT port tab for the port to which your printer is
connected, then click the Port Configuration button.
To Next Page
Loading...
