1-6 Paper Handling
* Take care not to print on support sheets that are loaded under special media.
Storing EPSON Photo Paper
Return unused paper to the original package as soon as you finish
printing. Also, EPSON recommends storing your printouts in a
resealable plastic bag. Keep them away from high temperature,
humidity, and direct sunlight.
Loading Envelopes
When printing on envelopes, please note the following:
❏ You can load up to 10 envelopes at a time in the sheet feeder.
Note:
The folding quality and thickness of envelopes vary widely. If the
total thickness of the stack of envelopes exceeds 10 mm, press each
envelope in the stack flat before loading. If print quality declines
when a stack of envelopes is loaded, load one envelope at a time.
❏ Set the adjust lever to the “+” position. To do this, open the
printer cover and reposition the lever.
Matte Paper-Heavyweight Up to 20 sheets. Always place a
support sheet* under the stack of
Matte Paper-Heavyweight.
For A3 and Super A3 size, you can
only load one sheet at a time (only for
Stylus Photo 1290).
Premium Glossy Photo Paper One sheet at a time.
Ink Jet Back Light Film
(only for Stylus Photo 1290)
One sheet at a time.
Always put a sheet of plain paper
under back light film.
To Next Page
Loading...
