Maintenance 9-7
Note:
To maintain print quality, we recommend turning on the printer for at
least one minute every month.
Using the control panel buttons
Follow the steps below to clean the print head using the control
panel buttons.
1. Make sure that the
P
power light is on and that the
b
error
light is off.
Note:
If the
b
error light is flashing or on, you cannot clean the head and
this operation will start the ink cartridge replacement procedure. If
you do not want to replace an ink cartridge at this moment, press
the
b
maintenance button to return the print head to its home
position.
2. Hold down the
b
maintenance button for three seconds.
The printer starts cleaning the print head and the
P
power
light begins flashing. Print head cleaning takes about thirty
seconds to complete.
c
Caution:
Never turn off the printer while the
P
power light is flashing.
Doing so may damage the printer.
To Next Page
Loading...
