5-20 Using the Printer Software for Macintosh
You can make the following settings in the Page Setup dialog box.
Paper Size Select the paper size that you want to use. If you want
to define a custom paper size, see “Defining a custom
paper size” on page 5-23.
Paper Source Select the paper source you wish to use from the
following selections.
Sheet Feeder:
Select this to leave a 3-mm margin on both the right and
the left sides of the paper. This option is available when
printing on normal paper.
Roll Paper:
Select this to leave a 3-mm margin on both the right and
the left sides of the roll paper.
To Next Page
Loading...
