EPSON Stylus Photo R320 Revision B
TROUBLESHOOTING Troubleshooting with LED/LCD Indications and Status Monitor 3 Message 10
Ink Out Error On
Ink out
Black: T0481
For best results, use genuine EPSON
ink.
This error is detected in either of the following
cases.
1. The ink consumption reached 100%.
2. The Ink Cartridge is faulty. (CSIC memory
data error)
(Note)
Even in the Ink Out Error status, a small amount
of ink still remains in the Ink Cartridge to
protect the Print Head from printing without
ink.
No Ink Cartridge Blink
Ink cartridges cannot be recognized
Cyan: T0482
For best results, use genuine EPSON
ink.
This error is detected when the Ink Cartridge
has not installed, or not installed properly.
Ink cartridges cannot be recognized
Light Cyan: T0485
For best results, use genuine EPSON
ink.
This error is detected when the printer cannot
read and write the CSIC information of the
installed Ink Cartridge.
Table 1-3. LED/LCD Indication and STM3
Printer status
Maintenance
LED indication
LCD indication STM3 message Condition for error detection
To Next Page
Loading...
