Epson Stylus Photo R320 - Page 104

EPSON Stylus Photo R320 Revision B
MAINTENANCE Overview 104
<Lubrication Point>
Specified points on "Holder,
Scale, Right" in the figure on the
left
<Lubrication Type>
G-63
<Lubrication Amount>
8 points (Adequate dose)
<Remarks>
Use a brush to apply it
<Lubrication Point>
"Pulley, Driven Assy."
<Lubrication Type>
G-26
<Lubrication Amount>
1mm x 4 points
<Remarks>
Use a syringe to apply it
Holder, Scale, Right Upper surface
Both sides
Both sides
Upper surface
Upper surface
Inside surface of hole
Pulley, Driven Assy.
<Lubrication Point>
1. Upper surface of curving area
of "Holder, Idle Roller"
2. Lower surface of curving area
of "Holder, Idle Roller"
<Lubrication Type>
1. G-26
2. G-26
<Lubrication Amount>
1. 2 points (Adequate dose)
2. 2 points (Adequate dose)
<Remarks>
Use a brush to apply it
<Lubrication Point>
Inside surface of "Guide Plate,
CR"
<Lubrication Type>
G-26
<Lubrication Amount>
Home possition side: To edge of
‘Cover, Guide Plate, CR’.
Opposite side: To about 40mm
from edge.
<Remarks>
Use a syringe to apply it
1
2
Guide Plate, CR