Epson Stylus Photo R320 - Page 58

EPSON Stylus Photo R320 Revision B
DISASSEMBLY AND ASSEMBLY Disassembly 58
 Make sure that the hooks (x2) and the dowels (x2) of "APG
Assy." are securely attached to "Frame, Main".
 Check if the part indicated in the following figure is inserted in
the slits of "Frame, Main".
Figure 2-33. Reinstalling "APG Assy."
 Reattaching connector cable of PF Motor and PG Motor
 Tighten the screws in the order as shown in the figure.
Hook
APG Assy.
Dowel
It has to be inserted in the
slit of "Frame, Main"