R4CE91P
BasicOperationGuide
Rev. C
PRINTMC.FM A4 size
7/20/04
R
Proof Sign-off:
S.Shimozawa CRE Kawakami
H.Kimura
editor name
Printing Directly from a Memory Card 19
English
* Indicates the default setting.
Auto Correct P.I.M.* Prints using the PRINT Image Matching function. If the photo data does not include P.I.M.,
try printing with PhotoEnhance.
PhotoEnhance Prints enhanced images automatically.
It requires longer time, but gives better quality.
Exif Prints using the Exif Print function. It provides you with high-quality printouts.
None Prints with no automatic correction.
Small Image On Removes digital noise and enhances the resolution.
Off* Does not remove digital noise or enhance the resolution.
Brightness Brightest Makes printouts very bright.
Brighter Makes printouts slightly brighter.
Standard* Makes no adjustment.
Darker Makes printouts slightly darker.
Darkest Makes printouts very dark.
Contrast Highest Makes contrast of printouts very strong.
High Makes contrast of printouts slightly stronger.
Standard* Makes no adjustment.
Sharpness Sharpest Makes the outline of subjects very sharp.
Sharper Makes the outline of subjects slightly sharper.
Standard* Makes no adjustment.
Softer Makes the outline of subjects slightly softer.
Softest Makes the outline of subjects very soft.
Saturation Highest Sat. Makes printouts very vivid.
More Sat. Makes printouts slightly more vivid.
Standard Sat.* Makes no adjustment.
Less Sat. Makes printouts slightly duller.
Least Sat. Makes printouts very dull.
Date
Prints the
shooting date.
None* Prints with no date information.
yyyy.mm.dd e.g. 2003. 05. 18
mmm.dd.yyyy e.g. Oct. 18. 2003
dd.mmm.yyyy e.g. 18. Oct. 2003
Time
Prints the
shooting time.
None* Prints with no time information.
12-hour system e.g. 10:00
24-hour system e.g. 22:00
Print Info. Off* Prints with no information.
On Also prints information about the photo taken.
Fit to Frame On* Automatically trims the areas of an image that extend beyond the margins of the selected
print size. Either the top and bottom, or the left and right areas of photo is trimmed,
depending on the aspect ratio of the original photo and the selected print size.
Off Does not trim the image.
Bidirectional On* Faster (Printing quality is normal.)
By turning this function on, you can perform bidirectional printing (printing from right to left
and from left to right).
Off Slower (Printing quality is fine.)
Sticker length -2.5 to +2.5 Adjusts the printed position vertically in 0.5mm increments when printing on Photo Stickers.
Sticker side -2.5 to +2.5 Adjusts the printed position horizontally in 0.5mm increments when printing on Photo Stickers.
Menu Item Setting Item Description
To Next Page
Loading...
