R4CE91P
BasicOperationGuide
Rev. C
COPY.fm A4 size
7/20/04
L
Proof Sign-off:
S.Shimozawa CRE Kawakami
H.Kimura
editor name
8 Copying
Changing Copy Settings
.
Note:
The available menu items and settings will vary according to the copy layout selected.
Copy Density
1. Press the Menu button.
2. Select the Copy Density.
3. Adjust the copy density, then Press the OK
button.
Useful Information for Copying
Note for copying
❏ When you make a copy using a control panel
function, a moiré (cross-hatch) pattern may
appear on your printout. To eliminate the moiré,
change the reduce/enlarge ratio or shift the
position of the original document.
❏ The copied image may not have exactly the same
size as the original.
❏ Depending on the type of paper used, print
quality may decline in the top and bottom areas
of the printout, or these areas may be smeared.
❏ If this product runs out of paper while making
copies, be sure to load additional paper as soon
as possible. If left without paper for a long period
of time, the colors of the first copy made after
reloading may not accurately reflect those of the
original.
❏ If the LCD panel indicates low ink while you are
copying, you can either continue making copies
until the ink runs out, or stop making copies and
then replace the ink cartridge.
Menu Item Setting Item Description
Copies 1 to 99 Sets the amount of copies to make.
Reduce/Enlarge Actual Copies in the actual size.
Auto Fit Page Copies in the reduced or enlarged size that fits the size of the paper.
10 × 15 cm -> A4
A4 -> A5
A4 -> 10 × 15 cm
A5 -> A4
Copies in the reduced or enlarged size by selecting the appropriate
selection (original document size -> copy result size).
Zoom In/Out 25% to 400% Sets the percentage by which the image will be zoomed in or out
and copied.
Paper Type Plain, Prem.Glossy, GlossyPhoto,
SemiGloss, Matte, PQIJ, Photo
Paper, Bright White, Iron On
Sets the type of paper on which to print.
See page 6 for detailed settings.
Paper Size A4, A5, 10 × 15 cm (4 × 6 in) Sets the paper size to copy to.
Quality Draft, Text, Photo, Best Photo Sets the quality of the copy to be made.
Restoration Off, On Use this function when copying faded photos to restore the image
quality.
1. Select the Menu Item.
2. Select the Setting Item.
21
Lighter
Darker
Cancel OK
To Next Page
Loading...
Need help?
General
