Stylus Pro 4000 Field Repair Guide 4/28/05
Multi Sensor Auto PF Adjustment Printer Component, Software Item, LCD Display, Printer Button Page 154.
Multi Sensor Auto PF Adjustment
1. Load 17” Enhanced Matte roll paper.
2. From the Adjustment Wizard for the Pro 4000, select the Multi Sensor Auto PF Adjustment.
1. Click on Run.
2. The Printer will print a test pattern. (It
takes about 15 minutes). While it is
printing, it is reading the test pattern
with the Multi Sensor and correctly
setting the Feed Length Adjustment.
3. Click on Finish when completed.
To Next Page
Loading...
