Epson Stylus Pro 4000 - Print Head Slant Adjustment (CR)

Stylus Pro 4000 Field Repair Guide 4/28/05
Print Head Slant Adjustment (CR) Printer Component, Software Item, LCD Display, Printer Button Page 169.
Print Head Slant Adjustment (CR)
1. From the Adjustment Wizard for the Pro 4000, select the Print Head Slant Adjustment (CR).
2. Move the Carriage to the position shown below, remove 3 Screws, and remove the Carriage
Cover.
Move the Carriage to
this position (align with
the notch)
Remove 3 Screws
Remove the Carriage Cover