Stylus Pro 4000 Field Repair Guide 4/28/05
NVRAM.EXE Printer Component, Software Item, LCD Display, Printer Button Page 226.
NVRAM.EXE
Note: NVRAM.EXE is the utility that enables the backup and re-installation of parameters (settings),
necessary when exchanging the Main Board of a Pro 4000.
Installation:
1. Ensure that the Pro 4000 Printer Driver and Status Monitor 3 is installed on the system that will
be running the NVRAM.EXE.
2. Create a folder and copy the NVRAM.EXE files into it.
3. Double Click on NVRAM to start the utility.
4. Place the Printer in Parameter Backup Mode
1. Enter Maintenance Mode 2: Press and hold the Left, Down, and Up buttons and turn on the Printer
2. Lift both (2) Ink Levers
3. Remove the Maintenance Tank
4. Move the Paper Release Lever to the released position.
To Next Page
Loading...
