Stylus Pro 4000 Field Repair Guide 4/28/05
NVRAM.EXE Printer Component, Software Item, LCD Display, Printer Button Page 228.
Parameter Restore.
1. Pick the Pro 4000 printer driver.
The port that the driver is associated
with, will be displayed.
3.Click on Write to send previously loaded
Parameters to the Printer. (If the Parameters
are not loaded, click on Open and load saved
Parameters, then click on Write.
The utility will display this screen while it is
transmitting the Parameters to the Printer.
Do not turn the printer off until the utility
displays this screen.
To Next Page
Loading...
