Stylus Pro 4000 Field Repair Guide 4/28/05
Damper Removal Printer Component, Software Item, LCD Display, Printer Button Page 25.
17. Re-install the Junction Board, fasten with 1 Screw, and reconnect 4 Cables.
18. Perform cleaning cycles and nozzle checks until the nozzles are working.
19. Perform the Print Head mechanical adjustments.
19.1 Perform the Print Head Slant Adjustment (CR)
19.2 Perform the Print Head Slant Adjustment (PF)
Reconnect 4 Cables.
Install the Junction Board and fasten with 1 Screw.
This Connector
has a latch.
To Next Page
Loading...
