Rear/Spindle
A Rear unit
Remove if the paper jams, and then clear the jammed paper. Normally installed when using the printer.
B Roll paper holder unit connector
Always use with the cable connected.
C USB interface connector
Connects the USB cable.
D Airflow vents
Vents the air used to cool the inside of the printer.
E LAN connector
Connects the LAN cable.
F Status light (green and red)
The color indicates the network transmission speed.
Green : 10Base-T
Red : 100Base-TX
G Data light (orange)
The network connection status and data reception are indicated by a lit or flashing light.
Epson Stylus Pro 4900/4910 User's Guide
Introduction
11
To Next Page
Loading...
