Epson Stylus Pro 4900 - Uninstalling the Printer Driver

EPSON Status Monitor
You can check the printer's status, such as the remaining
ink level and error messages, from the computer's
screen.
Nozzle Check
This function prints a nozzle check pattern to check if
the print head nozzles are clogged. If you see banding or
gaps in the print outs, perform head cleaning to clear
any clogged nozzles.
U “Cleaning the print head” on page 115
Head cleaning
If you see banding or gaps in the print outs, perform
head cleaning. Cleans the surface of the print head to
improve the print quality.
U “Cleaning the print head” on page 115
Print Head Alignment
If the print results appear grainy or out of focus, perform
Print Head Alignment. The Print Head Alignment
function corrects print head gaps.
U “Correcting Print Misalignment (Print Head
Alignment)” on page 117
EPSON LFP Remote Panel 2
You can update the printer's firmware and make custom
paper settings. See the EPSON LFP Remote Panel 2 help
for details.
Printer Firmware Update
You can update the printer's firmware to the latest
version. See the EPSON LFP Remote Panel 2 help for
details.
Uninstalling the printer
driver
Follow the steps below to remove the printer driver and
EPSON LFP Remote Panel 2.
Note:
You must log in with an Administrator account.
A
Turn off the printer, and unplug the interface
cable.
B
Close all open applications.
C
Click the Apple Menu, the System Preferences
folder, and then the Print & Fax (Print & Scan
for Mac OS X v10.7) folder.
D
Select this printer, and then click -.
E
Click Delete Printer (or OK).
F
Insert the "Software Disc" supplied with this
printer into your computer.
Epson Stylus Pro 4900/4910 User's Guide
Using the Printer Driver(Mac OS X)
59