Maintenance Mode List
The factory setting is .
Item Parameter Explanation
Language Japanese Select the language used on the control panel's screen.
English
French
Italian
German
Portuguese
Spanish
Dutch
Korean
Chinese
Length Units Metric Select the unit of length which is displayed on the control
panel's screen or printed on the patterns.
Feet/Inch
Temperature Units ˚C Select the unit of temperature which is displayed on the
control panel's screen or printed on the patterns.
F
Auto Cleaning
Times
1 The number of times to perform auto cleaning when a clog
was detected after performing an auto nozzle check.
2
3
Maintenance Alert
Disable The type of running low warnings to display by the alert
lamp. If set to Disable, the alert lamp does not display any
running low warnings.
Ink The alert lamp flashes when running low on ink.
Maintenance Box The alert lamp flashes when Maintenance Box 1/2 does not
have enough empty space.
Ink Or Maint Box The alert lamp flashes when running low on ink or when
Maintenance Box 1/2 does not have enough empty space.
Papers
If either Roll Paper Remaining or Cut Sheet Remaining is
set, the alert lamp flashes when either of these reaches
their respective warning levels.
All The alert lamp flashes when running low on ink, when
Maintenance Box 1/2 does not have enough empty space,
or when running low on paper.
Epson Stylus Pro 4900/4910 User's Guide
Appendix
160
To Next Page
Loading...
