Printer Parts
Front section
A Front cover
Remove when replacing the built-in cutter or installing the optional SpectroProofer. Normally installed when
using the printer.
B Cartridge cover (left)
Open when replacing ink cartridges. U “Replacing Ink Cartridges” on page 120
C Paper cassette
Load cut sheets from 8 to 17 inches wide. U “Loading the Paper Cassette” on page 35
D Output tray
Ejected paper is collected here. Extend according to the size of the paper being ejected.
E Maintenance Box 2
This box collects waste ink when printing beyond the edges of the paper for borderless printing.
Epson Stylus Pro 4900/4910 User's Guide
Introduction
8
To Next Page
Loading...
