Epson Stylus Pro 4900 - System Requirements; Specifications Table

System Requirements
The following system requirements are necessary to
install and use the software for this printer.
Windows
Operating system Windows XP/Windows XP x64
Windows Vista
Windows 7
CPU Pentium® 4 2.0 GHz or higher
Memory 1 GB or more
Available hard disk
space
32 GB or more
Interface Hi-Speed USB-Compatible with the
USB 2.0 Specification.
Ethernet 10BASE-T, 100BASE-TX
*
Display resolution SVGA (800 x 600) or higher
resolution
* Use a shielded twisted-pair cable (Category 5 or higher).
Tip:
When installing, you must log in as a user with an
Administrator account (a user belonging to the
Administrators group).
Mac OS X
Operating system Mac OS X 10.4.11 to 10.7
CPU PowerPC G5 2 GHz or higher or an
Intel processor
Memory 1GB or more
Available hard disk
space
32 GB or more
Display resolution Mac OS X 10.7, 10.6 and 10.5:
WXGA (1280 x 800) or higher
resolution
Mac OS X 10.4.x:
XGA (1024 x 768) or higher
resolution
Interface Hi-Speed USB-Compatible with the
USB 2.0 Specification.
Ethernet 10BASE-T, 100BASE-TX
*
* Use a shielded twisted-pair cable (Category 5 or higher).
Specifications Table
Printer Specifications
Printing method On-demand ink jet
Nozzle
configuration
Black: 360 nozzles x 3 (Photo Black/
Matte Black,Light Light Black, Light
Black)
Color: 360 nozzles x 7 (Green,
Yellow, Light Cyan, Vivid Light
Magenta, Orange, Vivid Magenta,
Cyan)
Resolution
(maximum)
2880 × 1440 dpi
Control code ESC/P raster (undisclosed
command)
Paper feed method Friction feed
Built-in memory 256 MB for Main
64 MB for Network
Rated voltage AC 100 to 240 V
Rated frequency
range
50 to 60 Hz
Rated current 0.7 to 0.4A
Power
consumption
Printing: Approx. 52 W/Approx. 55
W (When the optional
SpectroProofer is installed)
Sleep mode: Approx. 8.5 W
Power off: 0.5 W or less
Temperature
Operating: 10 to 35 ˚C (50 to 95
o
F)
Storage (before unpacking):
-20 to 60 ˚C (-4 to 140
o
F) (within 120
hours at 60 ˚C (140
o
F), within a
month at 40 ˚C (104
o
F))
Storage (after unpacking):
-20 to 40 ˚C (-4 to 104
o
F) (within a
month at 40 ˚C (104
o
F))
Humidity Operating: 20 to 80 % (without
condensation)
Storage (before unpacking): 5 to 85
% (without condensation)
Storage (after unpacking): 5 to 85 %
(without condensation)
Epson Stylus Pro 4900/4910 User's Guide
Appendix
163