character position and repeat this step as necessary to complete the setting name. When you finish,
press the OK button.
Note: If you need to delete the previous character, press the left arrow button.
9. Press the up or down arrow button as necessary to select each available media setting and press
the OK button. If necessary, press the back button to return to the menu to select additional
settings.
Parent topic: Media Handling
Related tasks
Loading Media
Printable Area and Media Size Checking
The left and right edges of media recognized by your product vary depending on the Roll Paper Margin
and Select Paper Type settings.
• When the Roll Paper Margin setting is set to Normal, your product sets the top and bottom margins
to 0.6 inch (15 mm) and the side margins to 0.12 inch (3 mm).
• When the Roll Paper Margin setting is set to a different option, the margin size varies depend on the
setting and on the number of passes selected in your RIP software, as described in the following
tables.
29
To Next Page
Loading...
