Epson SureColor F6200 - Adjusting the Media Feed During Printing

3. Press the up or down arrow button to select a number for the set of media settings (from 1 to 10) and
press the OK button.
4. Press the up or down arrow button to select Paper Feed Adjust and press the OK button.
5. Do one of the following:
• To print an adjustment pattern, select Pattern and press the OK button. Press the OK button
again to print an adjustment pattern and go to the next step.
• To manually enter an adjustment value, select Value and press the OK button. Press the up or
down arrow buttons to select an adjustment value and press the OK button.
6. Measure the distance between the + symbols in the printed test pattern.
7. Press the up or down arrow button to select the measured distance and press the OK button.
Adjusting the Media Feed During Printing
Parent topic: Media Handling
Related tasks
Loading Media
Adjusting the Media Feed During Printing
Follow the steps here to adjust the feed during printing without printing a test pattern.
1. During printing, press the cut/feed media button.
The product control panel displays an adjustment value.
34