Epson SureColor F6200 - Replacing the Cutter

Parent topic: Maintenance
Related references
Maintenance Precautions
Maintenance Menu Settings
Replacing the Cutter
If the cutter stops cutting paper cleanly, it is time to replace the cutter.
Make sure you have a Phillips-head screwdriver before you begin.
1. Remove any paper loaded in the product.
2. Press the left or right arrow on the product control panel to highlight the tab and press the OK
button.
The Maintenance menu appears.
3. Press the up or down arrow button to select Cutter Maintenance and press the OK button.
4. Press the up or down arrow button to select Replace Cutter and press the OK button.
The cutter moves into replacement position.
78