7. Close the printer cover.
8. Plug in and turn on the product, then load roll paper.
9. To clean the pressure rollers, press the cut/feed media button, then hold down the down
arrow button to feed paper over the rollers.
10. Cut the media after feeding.
Parent topic: Maintenance
Related references
Maintenance Precautions
Related tasks
Removing Media
Cutting Media
Stirring High Density Black Ink
To prevent sedimentation and incorrect colors in your printed media, stir the High Density Black ink in
the ink tank once a week.
1. Open the ink inlet cover for the High Density Black ink shown here.
51
To Next Page
Loading...
